Summary of big dip Angle belt conveyor products.
Big dip Angle belt conveyor structure is in flat rubber conveyor belt on both sides of the glue can freely adjustable rubber waveform on vertical "skirt", between the skirt edge and has a certain strength and elasticity of diaphragm plate box, make the material in the bucket to continuous transmission. This series of conveyor and called for the guard belt conveyor, this series of big dip Angle belt conveyor is widely used in coal, food, building materials, chemical industry, water and electricity, and metallurgical industries, the environment temperature is 19 ℃ ~ + 40 ℃ within the scope of delivery the mass density of 0.5 2.5 t/m3 of all kinds of material. For conveying materials with special requirements, such as high temperature, acid, alkali, oil material or organic solvent composition such as material, raised edge conveyor belt for the use of special.
Big dip Angle belt conveyor main use:
1. The guard belt conveyor for general purpose material continuous conveying equipment, USES a conveyor belt with wavy guard and diaphragm plate. As a result, especially suitable for large obliquity conveyor.
2. The machine can be used in the coal industry, chemical industry, building material, metallurgy, electric power, light industry, food, port, shipping, etc, in the work environment humidity to + 40 ℃ to 15 ℃ - within the scope of delivery the mass density of 0.5 2.5 t/m3 of all kinds of material.
(3) for conveying materials with special requirements, such as: high temperature, acid, alkali, oil substances or organic solvent such as composition of the material, the use of special conveyor belt.
4. The guard belt conveyor transmission Angle 0 ° to 90 °.
Arrangement of big dip Angle belt conveyor:
In order to obtain better by feeding and unloading conditions, the native TongZha used "Z" shaped decorate a form. That has a horizontal section and horizontal section and inclined section, and the next level by the expected, the discharge in the level of paragraph. Between horizontal and inclined section on the convex arc segments frame connection, between horizontal and inclined section using concave segmental arc frame connected so as to realize the smooth transition belt.
1. On the horizontal section: in order to adapt to the requirement of different discharge height, head frame is divided into bow frame (H0 head frame height = 1000 mm), Chinese style heads (H0 head frame height = 1100 ~ 1100 mm) and high head frame (H0 head frame height = 1600 ~ 1600 mm). And correspondingly, in the horizontal section respectively with low convex segmental arc frame and type of frame leg (with head height H0 = 1000 mm), Chinese style and Chinese middle stands of convex segment leg (H0 with head frame height = 1100 ~ 1100 mm), high type and high middle stands of convex segment leg (H0 with head frame height = 1600 ~ 1600 mm).
2. Tilt section: no matter on the horizontal section USES a low type, of Chinese style, middle or high type frame leg, inclined section adopts low type frame leg in the middle. When the beta ≧ conveyor Angle 45 °, Ⅱ low type is recommended for the middle leg.
3. The horizontal section: the horizontal section with low type frame leg in the middle.
Big dip Angle belt conveyor main features:
1. Save area and save investment.
2. Bue, strong commonality.
3. The conveyor Angle 0 ° to 90 °
4. Convenient maintenance, with ordinary belt conveyor roller and other parts.
5. Wide scope of application: metallurgy, mining, port, environmental protection, food, chemical industry, building materials and so on.
The name and usage of big dip Angle belt conveyor components:
1. The raised edge conveyor belt wave:
Traction and load-bearing role in the conveyor. Wavy guard, transverse diaphragm and baseband conveying material to form the "brake" shape container, so as to realize the big inclination conveying.
2. Drive
Is power section of conveyor. By Y series motor, with what ZJ had type shaft type gear reducer, wedge type of non-return device.
3. The transmission drum:
Is a major part of the power transmission, conveyor belt with the friction between the driving drum and run. This series of driving drum with plastic surface and smooth surface, plastic surface roller is to increase the adhesion between the roller and the conveyer belt.
4. The redirection roller:
Used to alter the direction of the conveyor belt. Redirection roller used for conveyor belt (not carrying surface) under the surface.
5. Press pulley:
Used to alter the direction of the conveyor belt, belt wheel used for surface of the conveyor belt (bearing surfaces).
6. Roller:
Roller used for supporting conveyor belt and belt material, make its stable operation. This series has the parallel under the roller, flat roller two types.
7. Support with roller:
Support with roller used for bearing conveyor belt on the convex segmental arc frame under the branch, raised edge conveyor belt bearing in on either side of the empty side. Several groups of support with a roller to form a circular arc segment is used to make the conveyor belt redirection. With roller adopt cantilever support.
8. Vertical roll:
Vertical roll used to limit the conveyor belt running deviation, and install in the upper and lower section of the rack. Each filter section of the rack is equipped with four, two upper and lower points each.
9. Flap wheel cleaning device:
Flap for conveyor belt on the back, fell on the conveyor belt material.
10. The tension device;
Its functions are: 1. The conveyor belt have enough tension, ensure between the belt and driving roller not skid. 2. Limit conveyor belt between the bearing sag, make the machine run properly. This series adopts screw tension device.
11. Frame, head, head shield funnel, feed trough, the middle frame, middle frame leg:
In the conveyor plays a role of supporting, dustproof and feed, respectively. This series of middle leg has low type, Chinese style and the high type 3 kinds. Under the horizontal section and tilt only with low type frame leg, and upper and lower levels according to the different heads (low style, Chinese style and the high head frame) with different leg in the middle of the frame (low type, of Chinese style and the high type middle leg).
Technical parameter list:
带宽B(mm)
|
300
|
400
|
500
|
650
|
800
|
|||||||||
挡边高(mm)
|
40
|
60
|
60
|
80
|
80
|
120
|
120
|
160
|
120
|
160
|
|
200
|
240
|
|
部分输送倾角输送量Q3/h
|
30°
|
15
|
14
|
20
|
34
|
46
|
71
|
104
|
120
|
128
|
157
|
|
195
|
235
|
45°
|
11
|
10
|
14
|
26
|
35
|
57
|
83
|
97
|
102
|
127
|
|
157
|
195
|
|
60°
|
8
|
7
|
10
|
18
|
25
|
40
|
58
|
69
|
72
|
90
|
|
112
|
142
|
|
90°
|
4
|
4
|
5
|
10
|
13
|
21
|
31
|
37
|
38
|
48
|
|
60
|
76
|
|
外型尺寸
|
头轮中心高H2/h(MM)
|
350-100
|
1100-2000
|
1300-2000
|
1300-2000
|
|||||||||
尾轮中心高H2/h(MM)
|
335
|
330-490
|
600
|
600
|
600-800
|
|||||||||
中间段带面高H2/h(MM)
|
450
|
500-700
|
760-800
|
800-850
|
800-1115
|
|||||||||
中间段地脚宽B2/h(MM)
|
480
|
580
|
870
|
1020
|
1220
|
|||||||||
带宽B(mm)
|
1000
|
1200
|
1400
|
|||||||||||
挡边高(mm)
|
120
|
160
|
200
|
240
|
160
|
200
|
240
|
300
|
160
|
200
|
240
|
300
|
400
|
|
部分输送倾角输送量Q3/h
|
30°
|
172
|
216
|
267
|
327
|
275
|
331
|
419
|
466
|
319
|
395
|
500
|
564
|
794
|
45°
|
137
|
175
|
216
|
271
|
222
|
267
|
347
|
384
|
258
|
318
|
414
|
465
|
680
|
|
60°
|
96
|
124
|
153
|
197
|
158
|
190
|
253
|
178
|
184
|
226
|
302
|
337
|
524
|
|
90°
|
51
|
66
|
83
|
106
|
85
|
102
|
136
|
149
|
98
|
121
|
162
|
180
|
281
|
|
外型尺寸
|
头轮中心高H2/h(MM)
|
1400-2000
|
1600-2000
|
|||||||||||
尾轮中心高H2/h(MM)
|
600-800
|
800-1000
|
800-1200
|
|||||||||||
中间段带面高H2/h(MM)
|
800-1200
|
1050-1500
|
1050-1700
|
|||||||||||
中间段地脚宽B2/h(MM)
|
1440
|
1690
|
1890
|