Pharmaceutical factory dust catcher is usually called pharmaceutical dust catcher or pharmaceutical companies, pharmaceutical workshop filter dust removal equipment.
Pharmaceutical factory of bag filter dust removal process:
1, the dust hood of dust catcher technology process gases.
2, the dust gas under the action of suction fan, reach inside the equipment through a pipe.
3, in the dust removal equipment zhongtong filter tube or filter bag dust will be separated from the air.
4, after purification, the gas through a tube or filter bag of discharge from the vent.
5, dust collection and disposal of the separated.
For pharmaceutical industry, there will be a different nature of the material dust removal, should distinguish between them, separating collection. Such as toxicity yinpian workshop dust removal alone do a system, dust removal system to distinguish with other workshop workshop to insulation. Usually dust removal system to distinguish the basic requirements are as follows:
1, in the same production process, homework dust point distance is not a lot of time together, the right to use the same system.
2, when there are different kinds of dust, dust, if there is no recovery value these dust mixed back or dust, a system can also be fellow.
3, is not the same as the temperature and humidity of dust and gas when the blend can cause condensation inside the duct, should be separated for dust removal system.
Pharmaceutical factory bag dust collector has the following features:
1, the pharmaceutical factory covers an area of small bag filter. According to processing volume size and site location for single or double row of combination design.
2, pharmaceutical factory, bag filter dust removal efficiency is high, service life is long, the dust concentration, high flue gas emissions concentration is lower than the national emission standards.
3, pharmaceutical factory dust filter bag is fixed firmly, easy tear open outfit. Filter bag to sew in the mouth of the elastic ring embedded in the flower plate, complete elimination of dust leakage. Convenient dismantling filter bag, pollution-free people contact with the filter bag is short.
4, long filter bag. Filter bag can be increased to 6 meters or more, greatly breaks through the usually think pulse dust collector bag length limit, and ash removal effect is good.
5, pharmaceutical factory, bag dust remover using highly efficient, low consumption injection device, slag discharge pressure is low, ash removal strength, system without having to stop the wind dust.
