BLS - 8 l tower of the main equipment in wet kiln dust catcher by the dust removal and ash water separator and auxiliary equipment and other components of the water pump, fan, electric control console, extended by pipeline connection form an edge dust dust removal, grey water separation, recycling and water recycle the integrity of the system.
   BLS - 8 l wet kiln dust collector operation mechanism:
Mechanical two chimney flue gas under the jet induced acceleration, tangential respectively into the formation of cyclone dust removal tower, due to the effect of centrifugal force, the most of the dust into the wall by water film to capture both inside and outside, the complete the first stage division; Air flow in the process of continue to spin up, after spray washing, complete the secondary dust removal. In addition to the ash water mixture into grey water separator separation processing, after the enrichment of grey water discharged from the separator to pull conveyer, into raw materials mixing into a ball again, realize recycling. Be clarified water flowed from the upper separator to the middle water tank and water pump into the dedusting tower, the circular arrangement of nozzle water film formation, realize the recycling of water. All equipment to focus on an electronic work station control for safety running, electric control system adopted some necessary sound and light alarm device.
  The main equipment in BLS - 8 l wet kiln dust collector structure and working principle:
Dust removal tower is composed of outside and vice towers, are made of stainless steel plate. Outside the tower diameter 2. 4 m, 12. 7 m. Deputy tower diameter 0. 5 m, is located in the central tower, spray washing with eight vortex nozzle along outside the tower bottom circular arrangement. Grey water separator for ordinary steel manufacturing, use "TO" 2 resin anticorrosion effective diameter. 8 m, overall height 4. 3 m, central has to affects mud collecting device with reducer, arm plowshare silt deposition plaster and discharge to the center. When set mud arm for live, can stop running, send out sound and light alarm at the same time, after processing, still cannot restore operation, the application of ash removal. Mud collecting arm stuck is a power outage or for a long time not caused by the mud, the longer the blackout, fault, therefore require users equipped with dual power supply.