WC type low voltage venturi dust catcher can be widely used in requiring high dust removal efficiency, also can be used as a harmful gas washing purification.
WC type low voltage venturi dust collector structure and principle:
  Scripture venturi tube of dust and gas from the water tank outflow, down a venturi tube wall weir flow of water contact. In the throat make water splash with higher air velocity and the formation of a small water droplets, dust due to collide with the drops of water and by water capture or due to the condensed into larger dust particles directly into precipitation tank water. Fewer particles of gas into the cyclone tube to capture again. Cyclone tube dehydration effect at the same time.
WC type low voltage venturi dust catcher run:
1, because the water dust removal, the runtime should freeze protection;
2, adjust the water supply pipe valve, make the plughole high water column 2 cm's advisable;
3, adjust the filter at the bottom of the valve opening, make the runtime overflow pipe has a small amount of water overflow;
4, for saving water, can be recycled.
WC type low voltage venturi dust collector use:
  The dust collector has been through the identification, identification of advice: "reasonable design, advanced performance, quality qualified, users reflect the good".
This equipment in the factory for artificial dust test, Beijing nonferrous metallurgy design institute and anshan iron and steel institute of labor health were determined, and the dust removal efficiency is 98-99. 88%.
Of a copper mine and the basic ceramics using the dust removal effect were determined, the dust removal efficiency of 99 respectively. 17% and 99. 99%.
At present, this kind of filter is widely used in the concentrator, ceramics factory, dyeing factory, copper, lead-zinc mine, the authors crushing, high-frequency porcelain factory, mine, foundry, cremation plant, and boiler dust removal.