Cli/type A cyclone
2016-04-24 15:20:00 From:本站 View:469

   Cli/type A cyclone dust collector is A kind of modified XLT type cyclone. Its structure features a cut slopes downward spiral linear gas imports, roof for spiral guide plate. The smaller the Angle of the guide plate, the greater the pressure loss, but reduce the dust removal efficiency. In general, guide plate Angle using the 8 degrees to 20 degrees, cli/type A cyclone by 15 degrees. Because the gas from the tangential, and have the effect of the guide plate, can eliminate up into the gas flow and the formation of small vortex flow, reduce kinetic energy consumption, improve the efficiency of dust removal. It is another feature of the cylinder body slender cone is longer, and the cone Angle is lesser, can improve the efficiency of dust removal, but the pressure loss is higher also.
  Cli/type A cyclone technical specifications:
Cli/type A cyclone cylinder diameter as the benchmark, have Φ 300 - Φ 800 mm, A total of 11 kinds of specifications, for every 50 mm level. Classified by cylinder number has a single cylinder, double cylinder, three cylinder, four cylinder and six cylinder 5 kinds of combinations. There are two kinds of each combination exhaust type, a horizontal (side) for exhaust (X), commonly used in negative pressure operation; One for the upper (center) exhaust type (Y), used for positive pressure or negative pressure operation. Binocular combination of X, there is in the middle of the exhaust and the side inlet and exhaust two combined type; Single cylinder and three buckets only side inlet and exhaust a type; Four cylinder and six cylinder only in the middle of inlet and exhaust type. Various combinations for Y type, can be used either in X inlet position. Cylinder and volute have right turn two type of rotation and left. When installation, into the exhaust can use ` rotate 90 degrees different direction of the assembly. Ash discharging device monocular combination with flashing valve cone type, the other four kinds of combination with rotary feeder. Flange gasket selection according to the different working gas temperature, when the temperature is greater than 60 ℃ with asbestos rubber gaskets, less than 60 ℃ available rubber gasket. After the assembly, should be not less than 30000 pa pressure test, to ensure the airtight no air leakage.

Keys: Cli/type A cyclone

Product List
Contact Way
Telphone:86 0533 4651589
Mobile:13589518127
FAX:86 0533 4651589
ADD:Zibo city boshan area bo lai is high-speed intersection
Website:www.sdbaogang.com
Friend Links:
Copyright (C) Boshan baogang mechanical factory All rights reserved. ADD:Zibo city boshan area bo lai is high-speed intersection
Tel:0533-4651589
信息公示