XMC pulse bag filter
2016-04-24 15:16:00 From:本站 View:481

   XMC pulse bag filter is my company in the international MC - type II and Japan FBF bag filter on the basis of the improvement of new efficient pulse dust collector, a combination of chamber blow, the advantages of different pulse injection filter overcomes the chamber soot cleaning strength is not enough, in and out of the unequal distribution of wind characteristics, expand the range of application.
   XMC pulse bag filter according to different specifications solenoid valve can be combined with different divider, this series of filter can be negative or positive pressure operation, its ontology structure without any change, dust collecting efficiency of 99. More than 8%, dust concentration of purified gas < 100 mg / 3, such as this series of filter used in cold areas or flue gas is lower than zero to add insulation heating device, shell will change accordingly.
   XMC pulse bag filter can be widely used in crushing, grinding machine, dryer, asphalt mixing floor furnaces such as dust and soot dust collecting system, the material of dust filter bag with polyester fiber needled felt, allowing the frontier using temperature can reach < 120 ℃, such as the filter bag by beauty, high temperature in the filter material allows the temperature of exhaust cooling measures should be taken before entering the dust collector. XMC pulse bag filter improves the dust collecting efficiency, adaptability, prolong the service life of the filter bag, after many years of production practice, the less stable equipment operation, maintenance, wider range of combination, well received by the masses of users.
   XMC pulse bag filter working principle:
   When dusty gas from the air inlet to filter, first met in the middle of the outlet inclined plate and baffle, air turned into the ash bucket, slowing down of air flow at the same time, due to inertia effect, coarse particles of dust in the gas directly into the hopper. Have the effect of dust in advance, the airflow into the ash hopper then fold and upward through internal filter bag dust containing metal skeleton was set on the outer surface of the filter bag, after purification, the upper gas into the filter bag chamber clean room, packed into the outlet. Through the filter bag dust gas purification process, with the increase of time and accumulate more and more attached to the filter bag dust, therefore make the resistance of the filter bag is gradually increased, the parameters of gradually reduce, to work, to control the resistance within a certain range (140-170 mm water column), then when the resistance to limit range, triggered by pulse controller issue instructions according to the order of the control valve open pulse valve, air bags of compressed air by spray torch each hole scripture's tube into the corresponding filter bag, filter bag instant swelling, make the product attached to the surface of the filter bag dust fall off, filter bag be regenerated. Clear the dust fall into ash hopper eduction body by the ash discharge system. The attached to the filter bag dust deposition pulse blowing soot cleaning cycle, purified gas through normal, ensure the normal operation of the dust collector.
Keys: XMC pulse bag filter

Product List
Contact Way
Telphone:86 0533 4651589
Mobile:13589518127
FAX:86 0533 4651589
ADD:Zibo city boshan area bo lai is high-speed intersection
Website:www.sdbaogang.com
Friend Links:
Copyright (C) Boshan baogang mechanical factory All rights reserved. ADD:Zibo city boshan area bo lai is high-speed intersection
Tel:0533-4651589
信息公示