HMC type single pulse dust collector is my company after digesting and absorbing foreign advanced technology and improved design of small bag filter. The equipment principle is: the dust gas from the air inlet into the hopper, or through open flange hole into the filter bag, dust gas through the filter bag filter for net net gas into the air chamber, then through net exhaust gas, by the fan. Dust attached to the outer surface of the filter bag, and continue to increase, increasing the resistance of filter bag filter, the device for resistance less than 1200 pa, bag filter can continue to work, need to clear the dust on the filter bag on a regular basis. Soot is by the program controller timing sequence starting pulse valve, make the compressed air inside the bag (0.5 0.7 MPa) by injection hole jet (referred to as a wind) induced by venturi several times in a flash of wind (called a secondary air) into the surrounding air filter bag filter bag swelling in an instant, and accompanied by airflow reverse effect of shake off the dust, to achieve the purpose of ash removal.
   And HMC type single pulse dust catcher adopts high voltage (0.5-0.5 MPa) large flow pulse valve detailed filter bag blowing ash removal technology, compared with other single country, HMC type single pulse dust catcher with soot kinetic energy is large, clear ash efficiency high characteristic, and small volume, light weight, easy installation, simple and compact structure convenient maintenance (filter), widely used in building material, metallurgy, mining, chemical, coal, superfine powder of non-metallic mineral processing industries such as dust gas purification processing system, is the ideal equipment of environmental protection.